Descripción de Producto
Su uso en casa a casa de alimentación de la pantalla LCD de UPS
True on-line de la tecnología de doble conversión con el control por microprocesador avanzado UPS en línea
Amplia gama de tensión de entrada con la tecnología de alta frecuencia
El tiempo de transferencia cero
La protección contra todo tipo de problemas de energía
Autocomprobación al inicio de la UPS
Testigo de fallo de cableado de sitio
La batería en función de encendido
Interfaz de comunicación RS232 Smart
Intelligent ranura disponible
Batería de ácido selladas, libre de mantenimiento de la batería 
| Model | H1K(S) | H1.5K(S) | H2K(S) | H3K(S) | |
| CAPACITY | 1000 VA/700 W | 1500 VA/1050 W | 2000 VA/1400 W | 3000 VA/2100 W | |
| INPUT | |||||
| Voltage Range | Low Line Transfer | 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % or | |||
| 80 VAC / 70 VAC / 60 VAC / 50 VAC ± 5 % | |||||
| (based on load percentage 100% - 80% / 80% - 70% / 70% - 60%/60% -0) | |||||
| LowLine Comeback | 175 VAC ± 5 % or 85 VAC ± 5 % | ||||
| High Line Transfer | 300 VAC ± 5 % or 150 VAC ± 5 % | ||||
| High Line Comeback | 290 VAC ± 5 VAC or 143 VAC ± 3 VAC | ||||
| Frequency Range | 40 Hz ~ 70 Hz | ||||
| Phase | Single phase with ground | ||||
| Power Factor | ≥ 0.99 @ 220-230 VAC (input voltage) | ||||
| OUTPUT | |||||
| AC Voltage Regulation (Bat. Mode) | ± 3% | ||||
| Frequency Range (Synchronized Range) | 47 ~ 53 Hz or 57 Hz ~ 63 Hz | ||||
| Frequency Range (Bat. Mode) | 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz | ||||
| Current Crest Ratio | 3: 1 | ||||
| Harmonic Distortion | < = 3 % THD (Linear Load) | < = 4 % THD (Linear Load) | |||
| < = 6 % THD(Non-linear Load) | < = 7 % THD(Non-linear Load) | ||||
| Transfer Time | AC to DC | Zero | |||
| Inverter to Bypass | 4 ms (Typical) | ||||
| Waveform (Bat. Mode) | Pure Sine Wave | ||||
| EFFICIENCY | |||||
| To AC Mode | 85% | 88% | |||
| To Battery Mode | 83% | ||||
| BATTERY | |||||
| Standard Model | Battery Type | 12 V / 7 AH | 12 V / 9 AH | 12 V / 7 AH | 12 V / 7 AH |
| Numbers | 3 | 3 | 8 | 8 | |
| Typical Recharge Time | 4 hours recover to 90% capacity | ||||
| Charging Current (max. ) | 1.0 A | ||||
| Charging Voltage | 41.0 VDC ± 1% | 102.1 VDC ± 1% | |||
| Long-run Model | Battery Type/Numbers | Depending on the capacity of external batteries | |||
| Charging Current (max. ) | 4.5 A | ||||
| Charging Voltage | 41.0 VDC ± 1% | 102.1 VDC ± 1% | |||
| INDICATORS | |||||
| LCD Panel | UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions | ||||
| ALARM | |||||
| Battery Mode | Sounding every 4 seconds | ||||
| Low Battery | Sounding every second | ||||
| Overload | Sounding twice every second | ||||
| Fault | Continuously sounding | ||||
| PHYSICAL | |||||
| Standard Model | Dimension DXWXH (mm) | 410 X144 X 200 | 455 X 190 X 330 | ||
| Net Weight (KGS) | 12.95 | 14 | 30.25 | 30.5 | |
| Long-run Model | Dimension, DXWXH (mm) | 397 X 145 X 220 | 421 X 190 X 318 | ||
| Net Weight (KGS) | 5.85 | 13.3 | |||
| OPERATING ENVIRONMENT | |||||
| Humidity | 20-90 % RH @ 0- 40° C (non-condensing) | ||||
| Noise Level | Less than 45dB @ 1 Meter | ||||
| MANAGEMENT | |||||
| Smart RS-232/USB | Supports Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, and MAC | ||||
| Optional SNMP | Power management from SNMP manager and web browser | ||||